NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Setup Wizard Services screen settings, Web

ProSecure Unified Threat Management (UTM) Appliance

Enter the settings as explained in the following table, and then click Next to go the following screen.

Table 7. Setup Wizard Step 4: Services screen settings

Setting		Description
Email
SMTP		SMTP scanning is enabled by
		default on standard service port 25.	To disable any of these services, clear the
POP3		POP3 scanning is enabled by default	corresponding check box. You can change the
		on standard service port 110.	standard service port or add another port in the
			corresponding Ports to Scan field.
IMAP		IMAP scanning is enabled by default
		on standard service port 143.
Web
HTTP		HTTP scanning is enabled by default	To disable HTTP scanning, clear the corresponding
		on standard service port 80.	check box. You can change the standard service port
			or add another port in the corresponding Ports to Scan
			field.
HTTPS		HTTPS scanning is disabled by	To enable HTTPS scanning, select the corresponding
		default.	check box. You can change the standard service port
			(443) or add another port in the corresponding Ports to
			Scan field.
FTP		FTP scanning is enabled by default	To disable FTP scanning, clear the corresponding
		on standard service port 21.	check box. You cannot change the standard service
			port in the corresponding Ports to Scan field.
	IMPORTANT:
	To enable scanning of encrypted emails, you need to configure the
	SSL settings (see Configure HTTPS Scanning and SSL Certificates
	on page 228).

After you have completed the steps in the Setup Wizard, you can change the security services by selecting Application Security > Services. For more information about these settings, see Customize Email Protocol Scan Settings on page 194 and Customize Web Protocol Scan Settings on page 210.

Use the Setup Wizard to Provision the UTM in Your Network

56