NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Add Bandwidth Profile screen settings, 173

ProSecure Unified Threat Management (UTM) Appliance

Figure 96.

3.Enter the settings as explained in the following table:

Table 34. Add Bandwidth Profile screen settings

Setting	Description
Profile Name	A descriptive name of the bandwidth profile for identification and management
	purposes.
Direction	From the Direction drop-down list, select the traffic direction for the bandwidth profile:
	• Outbound Traffic. The bandwidth profile is applied only to outbound traffic.
	Specify the outbound minimum and maximum bandwidths.
	• Inbound Traffic. The bandwidth profile is applied only to inbound traffic. Specify
	the inbound minimum and maximum bandwidths.
	• Both. The bandwidth profile is applied to both outbound and inbound traffic.
	Specify both the outbound and inbound minimum and maximum bandwidths.
Outbound Minimum	The outbound minimum allocated bandwidth in Kbps. The default setting is 0 Kbps.
Bandwidth
Outbound Maximum	The outbound maximum allowed bandwidth in Kbps. The default setting is 100 Kbps
Bandwidth	(you cannot configure less than 100 Kbps); the maximum allowable bandwidth is
	100,000 Kbps.
Inbound Minimum	The inbound minimum allocated bandwidth in Kbps. The default setting is 0 Kbps.
Bandwidth
Inbound Maximum	The inbound maximum allowed bandwidth in Kbps. The default setting is 100 Kbps
Bandwidth	(you cannot configure less than 100 Kbps); the maximum allowable bandwidth is
	100,000 Kbps.

Firewall Protection

173