ProSecure Unified Threat Management (UTM) Appliance

Verify Correct Installation

Test Connectivity

Test HTTP Scanning

Test the UTM before deploying it in a live production environment. The following instructions walk you through a couple of quick tests that are designed to ensure that your UTM is functioning correctly.

Test Connectivity

Verify that network traffic can pass through the UTM:

1.Ping an Internet URL.

2.Ping the IP address of a device on either side of the UTM.

Test HTTP Scanning

Verify that the UTM scans HTTP traffic correctly:

1.Log in to the UTM web management interface, and then verify that HTTP scanning is enabled. HTTP scanning is enabled by default (see Setup Wizard Step 4 of 10: Services on page 55).

2.Take note of the web security settings for HTTP (see Setup Wizard Step 6 of 10: Web Security on page 58).

3.If client computers have direct access to the Internet through your LAN, try to download the eicar.com test file from http://www.eicar.org/download/eicar.com.

The eicar.com test file is a legitimate denial of service (DoS) attack and is safe to use because it is not a malware threat and does not include any fragments of malware code. The test file is provided by EICAR, an organization that unites efforts against computer crime, fraud, and misuse of computers or networks.

4.Check the downloaded eicar.com test file, and note the attached malware information file.

What to Do Next

You have completed setting up the UTM to the network. The UTM is now ready to scan the protocols and services that you specified and perform automatic updates based on the update source and frequency that you specified.

If you need to change the settings, or to view reports or logs, log in to the UTM web management interface, using the default IP address or the IP address that you assigned to the UTM in Setup Wizard Step 1 of 10: LAN Settings on page 48.

Use the Setup Wizard to Provision the UTM in Your Network

68

Page 68
Image 68
NETGEAR UTM5EW-100NAS, STM150EW-100NAS Verify Correct Installation, What to Do Next, Test Connectivity, Test Http Scanning