NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Schedule, Email, and Manage Reports, 529, System

ProSecure Unified Threat Management (UTM) Appliance

Table 137. Report screen: report template information (continued)

Report template	Information reported for the specified time range
Blacklist By Time	For the POP3 and SMTP protocols separately, a chart and a table with the
	number of blocked emails from email addresses that are on the blacklist,
	and for the SMTP protocol only, a chart and a table with the number of
	blocked emails from email addresses that are on the real-time blacklist
	(RBL).
System
Total Bandwidth Usage By	A chart and a table with the consumed bandwidth, expressed in bytes.
Time
Top n User By Bandwidth	A chart and a table with the IP addresses that consume most bandwidth,
	expressed in bytes.
Total Malware Incidents By	For email and web traffic separately, a chart and a table with the number of
Time	detected malware incidents.
Top n Malwares	For email and web traffic separately, a chart and a table with the names of
	the malware that were detected most often, including the number of times
	that they were detected.
Top n Infected Clients	For email and web clients separately, a chart and a table with the IP
	addresses of the clients that were infected by malware most often, including
	the number of times that they were infected.
CPU & Mem Usage	For the UTM’s CPU and memory separately, a chart and a table with the
	usage, expressed in percentage.

Schedule, Email, and Manage Reports

To schedule automatic generation and emailing of reports:

1.Select Monitoring > Logs & Reports > Report. The Report screen displays. (The following two figures show only the Schedule Reports and Report History sections of the Report screen.)

Figure 310. Report, screen 3 of 4

Monitor System Access and Performance

529