NETGEAR UTM5EW-100NAS manual 470, Logs screen see Configure and Activate Firewall Logs on

ProSecure Unified Threat Management (UTM) Appliance

Table 116. Email and Syslog screen settings (continued)

Setting	Description
Enable	Select Logs to	• Service Logs. All events that are related to the status of scanning and
(continued)	Send	filtering services that you access from the Application Security main
	(continued)	navigation menu. These events include update success messages,
		update failed messages, network connection errors, and so on.
		• Firewall Logs. The firewall logs that you have specified on the Firewall
		Logs screen (see Configure and Activate Firewall Logs on page 476).
		• IPS Logs. All IPS events.
		• SSL VPN Logs. All SSL VPN events.
		• IPSEC VPN Logs. All IPSec VPN events.
		• Malware Logs. All intercepted viruses and malware threats.
		• Spam Logs. All intercepted spam.
	Format	Select a radio button to specify the format in which the log file is sent:
		• Plain text. The log file is sent as a plain text file.
		• CSV. The log file is sent as a comma-separated values (CSV) file.
		Select the Zip the logs to save space check box to enable the UTM to
		compress the log file.
	Size	Select the Split logs size to check box to break up the log file into smaller
		files, and specify the maximum size of each file in MB.
Send Logs via Syslog
Enable	Select this check box to enable the UTM to send a log file to a syslog server.
	SysLog Server	The IP address or name of the syslog server.
	SysLog	All the logs with a severity that is equal to and above the severity that you
	Severity	specify are logged on the specified syslog server. For example, if you select
		LOG_CRITICAL as the severity, then the logs with the severities
		LOG_CRITICAL, LOG_ALERT, and LOG_EMERG are logged.
		Select one of the following syslog severities from the drop-down list:
		• LOG EMERG. The UTM is unusable.
		• LOG ALERT. An action has to be taken immediately.
		• LOG CRITICAL. There are critical conditions.
		• LOG ERROR. There are error conditions.
		• LOG WARNING. There are warning conditions.
		• LOG NOTICE. There are normal but significant conditions.
		• LOG INFO. Informational messages.
		• LOG DEBUG. Debug-level messages.
	Logs	Select the check boxes to specify which logs are sent through the syslog
		server. The Send Logs via Syslog section of the screen lists the same check
		boxes as the Select Logs to Send subsection in the Email Logs to
		Administrator section of the screen (see earlier in this table).

Monitor System Access and Performance

470