NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 559, ATM Ipoa

ProSecure Unified Threat Management (UTM) Appliance

Table 143. Internet IP address settings

Setting	Description
Get Dynamically	If your ISP has not assigned you a static IP address, select the Get Dynamically from
from ISP	ISP radio button. The ISP automatically assigns an IP address to the UTM9S or
	UTM25S using DHCP network protocol.
Use Static IP	If your ISP has assigned you a fixed (static or permanent) IP address, select the Use
Address	Static IP Address radio button, and enter the following settings:
	IP Address	Static IP address assigned to you. This address identifies the
		UTM9S or UTM25S to your ISP.
	Subnet Mask	The subnet mask is usually provided by your ISP.
	Gateway IP Address	The IP address of the ISP’s gateway is usually provided by
		your ISP.
Use IP Over	If your ISP uses IP over ATM (IPoA), select the Use IP Over ATM (IPOA) radio button,
ATM (IPOA)	and enter the following settings:
	IP Address	The IP address assigned to you. This address identifies the
		UTM9S or UTM25S to your ISP.
	Subnet Mask	The subnet mask is usually provided by your ISP.
	Gateway IP Address	The IP address of the ISP’s gateway is usually provided by
		your ISP.

8.In the Domain Name Server (DNS) Servers section of the screen (see the following figure), specify the DNS settings as explained in the following table.

Figure 328.

xDSL Network Module for the UTM9S and UTM25S

559