NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual System logs WAN status, Pptp idle timeout, 654

ProSecure Unified Threat Management (UTM) Appliance

Table 170. System logs: WAN status, PPPoE idle timeout (continued)

Explanation	Message 1: Establishment of the PPPoE connection starts.
	Message 2: A message from the PPPoE server indicating a correct login.
	Message 3: The authentication for PPP succeeds.
	Message 4: The local IP address that is assigned by the server.
	Message 5: The server’s side IP address.
	Message 6: The primary DNS server that is configured on a WAN Settings screen.
	Message 7: The secondary DNS server that is configured on a WAN Settings
	screen.
	Message 8: The PPP link transitions to idle mode. This event occurs when there is
	no traffic from the LAN network.
	Message 9: The time in minutes that the link was up.
	Message 10: Data sent and received at the LAN side while the link was up.
	Message 11: The PPP connection terminates after the idle timeout.
Recommended Action	To reconnect during idle mode, initiate traffic from the LAN side.

•PPTP Idle-Timeout logs

Table 171. System logs: WAN status, PPTP idle timeout

Message 1	Nov 29 11:19:02 [UTM] [pppd] Starting connection
Message 2	Nov 29 11:19:05 [UTM] [pppd] CHAP authentication succeeded
Message 3	Nov 29 11:19:05 [UTM] [pppd] local IP address 192.168.200.214
Message 4	Nov 29 11:19:05 [UTM] [pppd] remote IP address 192.168.200.1
Message 5	Nov 29 11:19:05 [UTM] [pppd] primary DNS address 202.153.32.2
Message 6	Nov 29 11:19:05 [UTM] [pppd] secondary DNS address 202.153.32.2
Message 7	Nov 29 11:20:45 [UTM] [pppd] No response to 10 echo-requests
	Nov 29 11:20:45 [UTM] [pppd] Serial link appears to be disconnected.
	Nov 29 11:20:45 [UTM] [pppd] Connect time 1.7 minutes.
Message 8	Nov 29 11:20:45 [UTM] [pppd] Sent 520 bytes, received 80 bytes.
Message 9	Nov 29 11:20:51 [UTM] [pppd] Connection terminated.
Explanation	Message 1: The PPP connection process starts.
	Message 2: A message from the server indicating authentication success.
	Message 3: The local IP address that is assigned by the server.
	Message 4: The server’s side IP address.
	Message 5: The primary DNS address that is configured on a WAN Settings
	screen.
	Message 6: The secondary DNS address that is configured on a WAN Settings
	screen.
	Message 7: An idle link is detected.
	Message 8: Data sent and received at the LAN side while the link was up.
	Message 9: The PPP connection terminates after the idle timeout.
Recommended Action	To reconnect during idle mode, initiate traffic from the LAN side.

System Logs and Error Messages

654