NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Use Report Templates and View Reports Onscreen, 524

ProSecure Unified Threat Management (UTM) Appliance

3.The next step depends on whether you want to view the report on screen or schedule it to be emailed:

•Viewing onscreen. To view a filtered report onscreen, select a report by clicking View next to the report. (For more information, see the following section.) To save the configured filtering options for future use, click Apply at the bottom of the Report screen.

•Scheduling to be emailed. To save the configured filtering options to use them to schedule a filtered report that can be emailed, click Apply at the bottom of the Report screen, and then follow the procedure in Schedule, Email, and Manage Reports on page 529.

Note: Even if you click Apply to save the filtering options, when you leave the Report screen and then return to it, the From and To drop-down lists are reset to their defaults. You cannot save these settings. The other filtering options are saved when you click Apply.

Use Report Templates and View Reports Onscreen

The UTM provides preconfigured report templates in four categories:

•Web Activity

•IPS & Applications

•Email Activity

•System

Note: Adobe Flash player 10 or later is required to display the reports.

Note: To generate web reports, make sure that the Log HTTP Traffic check box on the Content Filtering screen is selected (see Configure Web

Content Filtering on page 218).

To display the report templates and view reports onscreen:

1.Select Monitoring > Logs & Reports > Report. The Report screen displays. (The following figure shows only the sections with the preconfigured report templates.)

Monitor System Access and Performance

524