NETGEAR UTM5EW-100NAS, STM150EW-100NAS Set User Login Policies, Configure Login Policies, 404

ProSecure Unified Threat Management (UTM) Appliance

Set User Login Policies

You can restrict the ability of defined users to log in to the UTM’s web management interface. You can also require or prohibit logging in from certain IP addresses or from particular browsers.

Note: User logon policies are not applicable to PPTP and L2TP users.

Configure Login Policies

To configure user login policies:

1.Select Users > Users. The Users screen displays (see Figure 238 on page 402).

2.In the Action column of the List of Users table, click the Policies table button for the user for which you want to set login policies. The policies submenu tabs display, with the Login Policies screen in view:

Figure 240.

3.In the User Login Policies section of the screen, make the following selections:

•To prohibit this user from logging in to the UTM, select the Disable Login check box.

•To prohibit this user from logging in from the WAN interface, select the Deny Login from WAN Interface check box. In this case, the user can log in only from the LAN interface.

Note: For security reasons, the Deny Login from WAN Interface check box is selected by default for guests and administrators. The Disable Login check box is disabled (masked out) for administrators.

4.Click Apply to save your settings.

Manage Users, Authentication, and VPN Certificates

404