NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Configure Https Smart Block, 212

ProSecure Unified Threat Management (UTM) Appliance

service on your network uses both port 80 and port 8080, enter both port numbers in the Ports to Scan field and separate them by a comma.

4.Click Apply to save your settings.

Configure HTTPS Smart Block

You can block access to HTTPS domains without enabling HTTPS scanning, which tends to slow down HTTPS traffic. (For information about HTTPS scanning, see Configure HTTPS Scanning and SSL Certificates on page 228.)

The HTTPS Smart Block feature lets you combine domains that you want to block into profiles. For example, you might want to block domains of a similar nature into one profile. You can add multiple profiles, and enable or disable profiles individually. Enabling profiles blocks access to the domains that are included in the profile. You can also assign these profiles in exception rules for users and members of a group to allow access to domains that you have blocked for all other users. (For information about creating exception rules, see Set Exception Rules for Web and Application Access on page 248.) You can create up to 200 profiles.

The default port on which the HTTPS Smart Block feature functions is port 443, but you can change this port, and you can add up to four more ports.

To configure the HTTPS Smart Block feature and add profiles:

1.Select Application Security > Services < HTTPS Smart Block. The HTTPS Smart Block screen displays:

Figure 115.

Content Filtering and Optimizing Scans

212