NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 601

ProSecure Unified Threat Management (UTM) Appliance

Figure 347.

3.Select the Enable WMM check box.

4.Click Apply to save your settings.

5.In the DSCP to Queue table, from the drop-down lists, select a WMM queue for each DSCP value that you want to use in a QoS profile:

•4. The highest priority queue with minimum delay.

•3. The second highest priority queue with low delay.

•2. The medium priority queue with medium delay.

•1. The low priority queue with high throughput.

6.Click Apply to save your settings.

Wireless Network Module for the UTM9S and UTM25S

601