NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual SSL VPN Wizard of 6 User Settings, 347

ProSecure Unified Threat Management (UTM) Appliance

SSL VPN Wizard Step 3 of 6 (User Settings)

Figure 206.

Note that the previous figure contains an example. Enter the settings as explained in the following table, and then click Next to go the following screen.

WARNING:

Do not enter an existing user name in the User Name field; otherwise, the SSL VPN Wizard fails when you attempt to apply the settings and the UTM reboots to recover its configuration.

Table 90. SSL VPN Wizard Step 3 of 6 screen settings (user settings)

Setting	Description
User Name	A descriptive (alphanumeric) name of the user for identification and management purposes.
User Type	When you use the SSL VPN Wizard, the user type is always SSL VPN User. You cannot
	change the user type on this screen; the user type is displayed for information only.
Group	When you create a domain on the second SSL VPN Wizard screen, a group with the same
	name is automatically created. (A user belongs to a group, and a group belongs to a
	domain.) You cannot change the group on this screen; the group is displayed for
	information only.
Password	The password that needs to be entered by the user to gain access to the UTM. The
	password needs to contain alphanumeric, hyphen (-), or underscore (_) characters.
Confirm Password	This field needs to be identical to the password that you entered in the Password field.
Idle Timeout	The period after which an idle user is automatically logged out of the web management
	interface. The default idle time-out period is 5 minutes.

Virtual Private Networking Using SSL Connections

347