NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual 560, Get Automatically from ISP radio button

ProSecure Unified Threat Management (UTM) Appliance

Table 144. DNS server settings

Setting	Description
Get Automatically	If your ISP has not assigned any Domain Name Server (DNS) addresses, select the
from ISP	Get Automatically from ISP radio button.
Use These DNS	If your ISP has assigned DNS addresses, select the Use These DNS Servers radio
Servers	button. Make sure that you fill in valid DNS server IP addresses in the fields. Incorrect
	DNS entries might cause connectivity issues.
	Primary DNS Server	The IP address of the primary DNS server.
	Secondary DNS Server	The IP address of the secondary DNS server.

9.Click Apply to save any changes to the SLOT-x ISP settings. (Or click Reset to discard any changes and revert to the previous settings.)

10.Click Test to evaluate your entries. The UTM9S or UTM25S attempts to make a connection according to the settings that you entered.

11.To verify the connection:

a.Return to the WAN screen by selecting Network Config > WAN Settings.

b.Click the Status button in the Action column of the SLOT-x entry to display the Connection Status pop-up screen.

Figure 329.

Note: The Connection Status screen should show a valid IP address and gateway. For more information about the Connection Status screen,

see View the WAN, xDSL, or USB Port Status on page 504.

xDSL Network Module for the UTM9S and UTM25S

560