NETGEAR UTM5EW-100NAS manual View the UTM IPSec VPN Log,  To query the IPSec VPN log, 290

ProSecure Unified Threat Management (UTM) Appliance

The Active IPSec SA(s) table lists each active connection with the information that is described in the following table. The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop button.

Table 70. IPSec VPN Connection Status screen information

Setting	Description
Policy Name	The name of the VPN policy that is associated with this SA.
Endpoint	The IP address on the remote VPN endpoint.
Tx (KB)	The amount of data that is transmitted over this SA.
Tx (Packets)	The number of IP packets that are transmitted over this SA.
State	The status of the SA. Phase 1 is the authentication phase, and Phase 2 is key exchange
	phase. If there is no connection, the status is IPSec SA Not Established.
Action	Click the Connect table button to build the connection, or click the Disconnect table
	button to terminate the connection.

View the UTM IPSec VPN Log

To query the IPSec VPN log:

1.Select Monitoring > Logs & Reports > Logs Query. The Logs Query screen displays.

2.From the Log Type drop-down list, select IPSEC VPN. The IPSec VPN logs display.

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

290