ProSecure Unified Threat Management (UTM) Appliance

Table 5. Setup Wizard Step 2: WAN Settings screen settings (continued)

Setting

Description

 

 

 

Use Static IP Address

If your ISP has assigned you a fixed (static or permanent) IP address, select the Use

 

Static IP Address radio button and enter the following settings.

 

IP Address

The static IP address assigned to you. This address identifies

 

 

the UTM to your ISP.

 

 

 

 

Subnet Mask

The subnet mask, which is usually provided by your ISP.

 

 

 

 

Gateway IP Address

The IP address of the ISP’s gateway, which is usually

 

 

provided by your ISP.

 

 

 

Domain Name Server (DNS) Servers

 

 

 

 

Get Automatically from

If your ISP has not assigned any Domain Name Servers (DNS) addresses, select the

ISP

Get Automatically from ISP radio button.

Use These DNS

If your ISP has assigned DNS addresses to you, select the Use These DNS Servers

Servers

radio button. Make sure that you fill in valid DNS server IP addresses in the fields.

 

Incorrect DNS entries might cause connectivity issues.

 

 

 

 

Primary DNS Server

The IP address of the primary DNS server.

 

 

 

 

Secondary DNS Serve

The IP address of the secondary DNS server.

 

 

 

After you have completed the steps in the Setup Wizard, you can change to the WAN settings by selecting Network Config > WAN Settings. Then click the Edit button in the Action column of the WAN interface for which you want to change the settings.

For more information about these WAN settings, see Manually Configure the Internet Connection on page 75.

Setup Wizard Step 3 of 10: System Date and Time

Figure 28.

Use the Setup Wizard to Provision the UTM in Your Network

54

Page 54
Image 54
NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Setup Wizard of 10 System Date and Time, Domain Name Server DNS Servers