NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Register the UTM with Netgear

ProSecure Unified Threat Management (UTM) Appliance

Register the UTM with NETGEAR

•Use the Web Management Interface to Activate Licenses

•Electronic Licensing

•Automatic Retrieval of Licenses after a Factory Default Reset

Use the Web Management Interface to Activate Licenses

To receive threat management component updates and technical support, you need to register your UTM with NETGEAR. The UTM comes with four 30-day trial licenses:

•Web protection

•Email protection

•Support and maintenance

•Application control and IPS

The service license keys are provided with the product package (see Service Registration Card with License Keys on page 23). For electronic licensing, you do not need the service license keys (see Electronic Licensing on page 67).

IMPORTANT:

Activating the service licenses initiates their terms of use. Activate the licenses only when you are ready to start using this unit. If your unit has never been registered before, you can use the 30-day trial period for all four types of licenses to perform the initial testing and configuration. To use the trial period, do not click Register in Step of the following procedure, but click Trial instead.

If your UTM is connected to the Internet, you can activate the service licenses:

1.Select Support > Registration. The Registration screen displays (see Figure 36 on page 66).

2.Enter the license key in the Registration Key field.

3.Fill out the customer and value-added reseller (VAR) fields.

WARNING:

To activate the 30-day trial period for a license, do not click

Register but click Trial instead. For more information, see the

Important information at the beginning of this section.

Use the Setup Wizard to Provision the UTM in Your Network

65