NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Pptp and PPPoE settings, Setting Description

ProSecure Unified Threat Management (UTM) Appliance

Figure 41.

6.If your connection is PPTP or PPPoE, your ISP requires an initial login. Enter the settings as explained in the following table:

Table 14. PPTP and PPPoE settings

Setting	Description
Austria (PPTP)	If your ISP is Austria Telecom or any other ISP that uses PPTP for login, select this radio
	button, and enter the following settings:
	Account Name	The account name is also known as the host name or system name.
		Enter the account name for the PPTP connection (usually your email ID
		assigned by your ISP). Some ISPs require you to enter your full email
		address here.
	Domain Name	Your domain name or workgroup name assigned by your ISP, or your
		ISP’s domain name. You can leave this field blank.
	Idle Timeout	Select the Keep Connected radio button to keep the connection always
		on. To log out after the connection is idle for a period:
		1. Select the Idle Timeout radio button.
		2. In the time-out field, enter the number of minutes to wait before
		disconnecting.
		This is useful if your ISP charges you based on the period that you are
		logged in.
	My IP Address	The IP address assigned by the ISP to make the connection with the
		ISP server.
	Server IP	The IP address of the PPTP server.
	Address

Manually Configure Internet and WAN Settings

76