NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Add QoS Profile screen settings, 170

ProSecure Unified Threat Management (UTM) Appliance

Figure 93.

The screen displays the List of QoS Profiles table with the user-defined profiles.

2.Under the List of QoS Profiles table, click the Add table button. The Add QoS Profile screen displays:

Figure 94.

3.Enter the settings as explained in the following table.

Note: This document assumes that you are familiar with QoS concepts such QoS priority queues, IP precedence, DHCP, and their values.

Table 33. Add QoS Profile screen settings

Setting	Description
Profile Name	A descriptive name of the QoS profile for identification and management purposes.
Re-Mark	Select the Re-Markcheck box to set the differentiated services (DiffServ) mark in the
	Type of Service (ToS) byte of an IP header by specifying the QoS type (IP precedence
	or DHCP) and QoS value. If you clear the Re-Mark check box, the QoS type and QoS
	value are ignored, and you can configure the QoS priority only.

Firewall Protection

170