NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual SSL VPN Wizard of 6 Port Forwarding, 350

ProSecure Unified Threat Management (UTM) Appliance

SSL VPN Wizard Step 5 of 6 (Port Forwarding)

Note: This screen displays only if you have selected the Port Forwarding check box on the SSL VPN Wizard Step 1 of 6 screen (see Figure 204 on page 339).

Figure 208.

Note that the previous figure contains an example. Enter the settings as explained in the following table, and then click Next to go the following screen.

WARNING:

Do not enter an IP address that is already in use in the upper Local Server IP Address field or a port number that is already in use in the TCP Port Number field; otherwise, the SSL VPN Wizard fails when you attempt to apply the settings and the UTM reboots to recover its configuration.

Table 92. SSL VPN Wizard Step 5 of 6 screen settings (port-forwarding settings)

Setting	Description
Add New Application for Port Forwarding
Local Server IP Address	The IP address of an internal server or host computer that remote users have
	access to.
TCP Port Number	The TCP port number of the application that is accessed through the SSL VPN
	tunnel. Following are some commonly used TCP applications and port numbers.
	FTP Data (usually not needed)	20
	FTP Control Protocol	21

Virtual Private Networking Using SSL Connections

350