NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual View Attached Devices and the Dhcp Leases, 505

ProSecure Unified Threat Management (UTM) Appliance

Table 133. Connection Status pop-up screen information (continued)

Item	Description
IP Address	The IP addresses that were automatically detected or that you manually configured.
	For more information, see the following sections:
Subnet Mask
	• For WAN ports, see Automatically Detecting and Connecting the Internet
Gateway	Connections on page 71 and Manually Configure the Internet Connection on
	page 75.
DNS Server
	• For the xDSL port (UTM9S and UTM25S only), see Automatically Detecting and
	Connecting the xDSL Internet Connection on page 553 and Manually Configure
	the xDSL Internet Connection on page 556.
	• For the USB port (UTM9S and UTM25S only), see Manually Configure the USB
	Internet Connection on page 604.
	Note: The information in the DHCP Server field displays only if your ISP does not
	require a login and the IP address is acquired dynamically from your ISP.
Lease Obtained	The time when the DHCP lease was obtained.
Lease Duration	The period that the DHCP lease remains in effect.

Depending on the type of connections, any of the following buttons might display on the Connection Status screen:

•Renew. Click to renew the DHCP lease.

•Release. Click to disconnect the DHCP connection.

•Disconnect. Click to disconnect the static IP connection.

For the multiple WAN port models only, the procedure to view the status of other WAN ports is similar to the one for the WAN1 port. After you have selected Network Config > WAN Settings, click the Status button in the Action column for the selected WAN interface to display the Connection Status screen for that WAN interface.

View Attached Devices and the DHCP Leases

The LAN Groups screen shows the network database, which is the Known PCs and Devices table, which contains all IP devices that UTM has discovered on the local network. The LAN Setup screen lets you access the DHCP leases pop-up screen.

View Attached Devices

To view the attached devices in the LAN Groups screen:

1.Select Network Config > LAN Settings. The LAN Settings submenu tabs display, with the LAN Setup screen in view. (The following figure shows some profiles in the VLAN Profiles table as an example.)

Monitor System Access and Performance

505