NETGEAR STM150EW-100NAS, UTM5EW-100NAS Enable Source MAC Filtering,  To edit a schedule, 179

ProSecure Unified Threat Management (UTM) Appliance

Table 36. Add Schedule screen settings (continued)

Setting

Description

Scheduled Time of Day

Select one of the following radio buttons:

•All Day. The schedule is in effect all hours of the selected day or days.

•Specific Times. The schedule is in effect only during specific periods of the selected day or days. To the right of the radio buttons, fill in the Start Time and End Time fields (Hour, Minute) and make a selection from the AM/PM drop-down lists to specify the periods during which the schedule is in effect.

Note: To add an another period to the schedule, click + (plus). This option allows you to specify two distinctive periods within one 24-hour period.

4.Click Apply to save your settings. The new schedule is added to the List of Schedules table. You now can select the schedule when you create or change a firewall rule.

To edit a schedule:

1.In the List of Schedules table, click the Edit table button to the right of the schedule that you want to edit. The Edit Schedule screen displays.

2.Modify the settings that you wish to change (see the previous table).

3.Click Apply to save your changes. The modified schedule is displayed in the List of Schedules table.

To delete one or more schedules:

1.In the List of Schedules table, select the check box to the left of each schedule that you want to delete, or click the Select All table button to select all schedules.

2.Click the Delete table button.

Enable Source MAC Filtering

The Source MAC Filter screen enables you to permit or block traffic coming from certain known computers or devices.

By default, the source MAC address filter is disabled. All the traffic received from computers with any MAC address is allowed. When the source MAC address filter is enabled, depending on the selected policy, traffic is either permitted or blocked if it comes from any computers or devices whose MAC addresses are listed in MAC Addresses table.

Note: For additional ways of restricting outbound traffic, see Outbound

Rules (Service Blocking) on page 129.

Firewall Protection

179