NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual 574, Setting Description SLOT-x Dynamic DNS Status

ProSecure Unified Threat Management (UTM) Appliance

3.Click the Information option arrow in the upper right of a DNS screen for registration information.

Figure 337.

4.Access the website of the DDNS service provider, and register for an account (for example, for DynDNS.org, go to http://www.dyndns.com/).

5.Configure the DDNS service settings for the DSL interface as explained in the following table:

Table 147. DNS service settings

Setting	Description
SLOT-x (Dynamic DNS Status: ...)
Change DNS to	Select the Yes radio button to enable the DDNS service. The fields that display onscreen
(DynDNS, TZO,	depend on the DDNS service provider that you have selected. Enter the following
Oray, or 3322)	settings:
	Host and Domain Name	The host and domain name for the DDNS service.
	Username or	The user name or email address for DDNS server
	User Email Address	authentication.
	Password or User Key	The password that is used for DDNS server authentication.
	Use wildcards	If your DDNS provider allows the use of wildcards in resolving
		your URL, you can select the Use wildcards check box to
		activate this feature. For example, the wildcard feature
		causes *.yourhost.dyndns.org to be aliased to the same IP
		address as yourhost.dyndns.org.
	Update every 30 days	If your WAN IP address does not often change, you might
		need to force a periodic update to the DDNS service to
		prevent your account from expiring. If the Update every 30
		days check box displays, select it to enable a periodic
		update.

6.Click Apply to save your configuration.

Set the UTM’s MAC Address and Configure Advanced WAN Options

The advanced options include configuring the maximum transmission unit (MTU) size, the port speed, and the MAC address of the UTM9S or UTM25S, and setting a rate limit on the traffic that is being forwarded by the UTM9S or UTM25S.

xDSL Network Module for the UTM9S and UTM25S

574