NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual RIP Configuration screen settings, 124

ProSecure Unified Threat Management (UTM) Appliance

Figure 65.

3.Enter the settings as explained in the following table:

Table 25. RIP Configuration screen settings

Setting	Description
RIP
RIP Direction	From the RIP Direction drop-down list, select the direction in which the UTM sends
	and receives RIP packets:
	• None. The UTM neither advertises its route table, nor accepts any RIP
	packets from other routers. This effectively disables RIP, and is the default
	setting.
	• In Only. The UTM accepts RIP information from other routers but does not
	advertise its routing table.
	• Out Only. The UTM advertises its routing table but does not accept RIP
	information from other routers.
	• Both. The UTM advertises its routing table and also processes RIP
	information received from other routers.

LAN Configuration

124