NETGEAR UTM5EW-100NAS manual Configure FTP Scanning, Customize FTP Antivirus Settings, 238

ProSecure Unified Threat Management (UTM) Appliance

Configure FTP Scanning

•Customize FTP Antivirus Settings

•Configure FTP Content Filtering

Some malware threats are specifically developed to spread through the FTP protocol. By default, the UTM scans FTP traffic, but you can disable scanning of FTP traffic, or specify how the UTM scans FTP traffic and which action is taken when a malware threat is detected. The UTM does not scan password-protected FTP files.

Customize FTP Antivirus Settings

To configure the antivirus settings for FTP traffic:

1.Select Application Security > FTP. The FTP submenu tabs display with the Anti-Virus screen in view:

Figure 132.

2.Enter the settings as explained in the following table:

Table 53. Anti-Virus screen settings for FTP

Setting	Description
Action
FTP	Action	The Anti-Virus check boxes for FTP is selected by default. When the UTM
		detects infected traffic, the default settings cause the downloaded files to be
		blocked and deleted.
		From the FTP drop-down list, select one of the following actions to be taken
		when an infected FTP file or object is detected:
		• Delete file. This is the default setting. The FTP file or object is deleted,
		and a log entry is created.
		• Log only. Only a log entry is created. The FTP file or object is not deleted.
		• Quarantine file. The FTP file or object is quarantined, and a log entry is
		created (see the Note on page 193).

Content Filtering and Optimizing Scans

238