NETGEAR UTM5EW-100NAS, STM150EW-100NAS Configure Login Restrictions Based on Web Browser, 406

ProSecure Unified Threat Management (UTM) Appliance

6.In the Add Defined Addresses section of the screen, add an address to the Defined Addresses table by entering the settings as explained in the following table:

Table 103. By Source IP Address screen settings

Setting	Description
Source Address Type	Select the type of address from the drop-down list:
	• IP Address. A single IP address.
	• IP Network. A subnet of IP addresses. You need to enter a netmask length in
	the Mask Length field.
Network Address / IP	Depending on your selection from the Source Address Type drop-down list, enter
Address	the IP address or the network address.
Mask Length	For a network address, enter the netmask length (0–32).
	Note: By default, a single IP address is assigned a netmask length of 32.

7.Click the Add table button. The address is added to the Defined Addresses table.

8.Repeat Step 6 and Step 7 for any other addresses that you want to add to the Defined Addresses table.

To delete one or more addresses:

1.In the Defined Addresses table, select the check box to the left of each address that you want to delete, or click the Select All table button to select all addresses.

2.Click the Delete table button.

Configure Login Restrictions Based on Web Browser

To restrict logging in based on the user’s browser:

1.Select Users > Users. The Users screen displays (see Figure 238 on page 402).

2.In the Action column of the List of Users table, click the Policies table button for the user for which you want to set login policies. The policies submenu tabs display, with the Login Policies screen in view.

3.Click the By Client Browser submenu tab. The By Client Browser screen displays. (The following figure shows a browser in the Defined Browsers table as an example.)

Manage Users, Authentication, and VPN Certificates

406