NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Add Computers or Devices to the Network Database, 114

ProSecure Unified Threat Management (UTM) Appliance

Add Computers or Devices to the Network Database

To add computers or devices manually to the network database:

1.In the Add Known PCs and Devices section of the LAN Groups screen (see the previous figure), enter the settings as explained in the following table:

Table 22. Known PCs and devices settings

Setting	Description
Name	Enter the name of the computer or device.
IP Address Type	From the drop-down list, select how the computer or device receives its IP address:
	• Fixed (set on PC). The IP address is statically assigned on the computer or
	device.
	• Reserved (DHCP Client). Directs the UTM’s DHCP server to assign the
	specified IP address always to this client during the DHCP negotiation (see Set
	Up Address Reservation on page 116).
	Note: When you assign a reserved IP address to a client, the selected IP address
	needs to be outside the range of addresses allocated to the DHCP server pool.
IP Address	In the IP Address field, enter the IP address that this computer or device is
	assigned. If the IP address type is Reserved (DHCP Client), the UTM reserves the
	IP address for the associated MAC address.
MAC Address	Enter the MAC address of the computer’s or device’s network interface. The MAC
	address format is six colon-separated pairs of hexadecimal characters (0–9 and
	A–F), such as 01:23:45:67:89:AB.
Group	From the drop-down list, select the group to which the computer or device is
	assigned. (Group 1 is the default group.)
Profile Name	From the drop-down list, select the VLAN profile to which the computer or device is
	assigned. (defaultVlan is the default VLAN group.)

2.Click the Add table button to add the computer or device to the Known PCs and Devices table.

3.As an optional step: To enable DHCP address reservation for the entry that you just added to the Known PCs and Devices table, select the check box for the table entry, and click the Save Binding button to bind the IP address to the MAC address for DHCP assignment.

Modify Computers or Devices in the Network Database

To modify computers or devices manually in the network database:

1.In the Known PCs and Devices table of the LAN Groups screen (see the previous figure), click the Edit table button of a table entry. The Edit Groups and Hosts screen displays (see the following figure, which contains an example).

LAN Configuration

114