NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual 620, Setting Description USB Dynamic DNS Status

ProSecure Unified Threat Management (UTM) Appliance

3.Click the Information option arrow in the upper right of a DNS screen for registration information.

Figure 357.

4.Access the website of the DDNS service provider, and register for an account (for example, for DynDNS.org, go to http://www.dyndns.com/).

5.Locate the USB section at the bottom of the screen, and configure the DDNS service settings for the DSL interface as explained in the following table:

Table 157. DNS service settings

Setting	Description
USB (Dynamic DNS Status: ...)
Change DNS to	Select the Yes radio button to enable the DDNS service. The fields that display onscreen
(DynDNS, TZO,	depend on the DDNS service provider that you have selected. Enter the following
Oray, or 3322)	settings:
	Host and Domain Name	The host and domain name for the DDNS service.
	Username or	The user name or email address for DDNS server
	User Email Address	authentication.
	Password or User Key	The password that is used for DDNS server authentication.
	Use wildcards	If your DDNS provider allows the use of wildcards in resolving
		your URL, you can select the Use wildcards check box to
		activate this feature. For example, the wildcard feature
		causes *.yourhost.dyndns.org to be aliased to the same IP
		address as yourhost.dyndns.org.
	Update every 30 days	If your WAN IP address does not often change, you might
		need to force a periodic update to the DDNS service to
		prevent your account from expiring. If the Update every 30
		days check box displays, select it to enable a periodic
		update.

6.Click Apply to save your configuration.

3G/4G Dongles for the UTM9S and UTM25S

620