NETGEAR UTM5EW-100NAS manual For More IPSec VPN Information, View the Active L2TP Users, 336

ProSecure Unified Threat Management (UTM) Appliance

View the Active L2TP Users

To view the active L2TP tunnel users:

Select Monitoring > Active Users & VPNs > L2TP Active Users. The L2TP Active Users screen displays:

Figure 202.

The List of L2TP Active Users table lists each active connection with the information that is described in the following table.

Table 87. L2TP Active Users screen information

Item	Description
Username	The name of the L2TP user that you have defined (see Configure User Accounts on
	page 401).
Remote IP	The client’s IP address on the remote LAC.
L2TP IP	The IP address that is assigned by the L2TP server on the UTM.
Action	Click the Disconnect table button to terminate the connection. (This button is displayed
	only when there an active connection.)

The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop button.

For More IPSec VPN Information

Visit http://prosecure.netgear.com/community/forum.php for information about the ProSecure forum and to become part of the ProSecure community.

The forum includes a Resources section with UTM How-To’s, including the following guides:

•How to Configure UTM and Apple iPhone and iPad for IPSec VPN

•How to Establish a VPN Connection Between a UTM and Cisco ASA5505

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

336