NETGEAR UTM5EW-100NAS Configure the Https Scan Settings,  To configure the Https scan settings

ProSecure Unified Threat Management (UTM) Appliance

Configure the HTTPS Scan Settings

To configure the HTTPS scan settings:

1.Select Application Security > HTTP/HTTPS > HTTPS Settings. The HTTPS Settings screen displays:

Figure 125.

2.Enter the settings as explained in the following table:

Table 50. HTTPS Settings screen settings

Setting Description

HTTP Tunneling

Select the check box in the HTTP Tunneling section to allow scanning of HTTPS connections through an HTTP proxy, which is disabled by default. Traffic from trusted hosts is not scanned (see Specify Trusted Hosts for HTTPS Scanning on page 235).

Note: For HTTPS scanning to occur correctly, you need to add the HTTP proxy server port in the Ports to Scan field for the HTTPS service on the Services screen (see Customize Web Protocol Scan Settings on page 210).

Show This Message When an HTTPS Connection Attempt Fails

By default, a rejected HTTPS connection is replaced with the following text, which you can customize: The SSL connection cannot be established. URL: %URL% REASON: %REASON%

Note: Make sure that you keep the %URL% and %REASON% metawords in a message to enable the UTM to insert the correct URL information and the reason for the rejection.

Content Filtering and Optimizing Scans

230