NETGEAR STM150EW-100NAS, UTM5EW-100NAS 497, Wireless information in SLOT-1 Info or SLOT-2 Info

ProSecure Unified Threat Management (UTM) Appliance

Table 127. Detailed Status screen fields (continued)

Item	Description
MAC Address	For the WAN or xDSL ports, this field	For information about configuring
	displays the default MAC address or the	the MAC address for the WAN port,
	MAC address that you have specified on the	see Set the UTM’s MAC Address
	Advanced Options screen.	and Configure Advanced WAN
	For the USB port, this field displays the	Options on page 94. For information
	detected MAC address.	about configuring the MAC address
		for the xDSL port, see Set the UTM’s
		MAC Address and Configure
		Advanced WAN Options on
		page 574.
Wireless information in SLOT-1 Info or SLOT-2 Info

Note: For the UTM9S and UTM25S only: Wireless information is shown in the SLOT-1 Info or SLOT-2 Info section, depending on the slot in which the wireless network module is installed.

The following fields are shown for the wireless network module:

Card Type	This is a fixed field that states Wireless.
Daughter Card	This is a fixed field that states Wireless.
Firmware Version	This is a fixed field that states N/A. This field might show a software version in a
	future release.
Country	The region and country that you have
	specified on the Radio Settings screen.
Operating Frequency	The operating frequency that you have
	specified on the Radio Settings screen:	For information about configuring
	2.4 GHz or 5 GHz.	the basic wireless radio settings, see
Advanced Wireless	The wireless mode that you have specified	Configure the Basic Radio Settings
		on page 580.
Network Mode	on the Radio Settings screen.
Channel	The channel or automatic channel selection
	that you have specified on the Radio Settings
	screen.
Access Points Information
Note: This information applies to the UTM9S and UTM25S only.
SSID	The SSID of the wireless access point that
	you have specified on the Add Wireless
	Profile screen.	For information about configuring
Security Type	The type of wireless security and encryption	the SSID, wireless security, and IP
	that you have specified on the Add Wireless	address, see Configure and Enable
	Profile screen.	Wireless Profiles on page 588.
IP Address	The IP address of the VLAN that you have
	specified on the Add Wireless Profile screen.
MAC Address	The MAC address of the wireless radio, adjusted for each wireless profile.

Monitor System Access and Performance

497