NETGEAR STM150EW-100NAS, UTM5EW-100NAS  To add a secondary WAN address to the DSL interface, 571

ProSecure Unified Threat Management (UTM) Appliance

For more information about firewall rules, see Overview of Rules to Block or Allow Specific

Kinds of Traffic on page 128).

It is important that you ensure that any secondary DSL addresses are different from the primary DSL, WAN, LAN, and DMZ IP addresses that are already configured on the UTM9S or UTM25S. However, primary and secondary DSL addresses can be in the same subnet. The following is an example of correctly configured IP addresses:

•Primary DSL IP address. 10.118.0.1 with subnet 255.255.255.0

•Secondary DSL IP address. 10.118.24.1 with subnet 255.255.255.0

•Primary WAN1 IP address. 10.215.74.1 with subnet 255.255.255.0

•Secondary WAN1 IP address. 10.215.81.1 with subnet 255.255.255.0

•DMZ IP address. 192.168.10.1 with subnet 255.255.255.0

•Primary LAN IP address. 192.168.1.1 with subnet 255.255.255.0

•Secondary LAN IP address. 192.168.2.1 with subnet 255.255.255.0

To add a secondary WAN address to the DSL interface:

1. Select Network Config > WAN Settings. The WAN screen displays (see Figure 322 on page 553).

2. Click the Edit button in the Action column of the SLOT-x entry. The WAN ISP Settings screen displays (see Figure 323 on page 554, which shows the SLOT-2 ISP Settings screen as an example).

3. Click the Secondary Addresses option arrow at the upper right of the screen. The SLOT-x Secondary Addresses screen displays (see the following figure, which shows the SLOT-2 Secondary Addresses screen as an example, and which includes one entry in the List of Secondary WAN addresses table).

Figure 335.

The List of Secondary WAN addresses table displays the secondary LAN IP addresses added for the DSL interface.

4.In the Add SLOT-x Secondary Addresses section of the screen, enter the following settings:

•IP Address. Enter the secondary address that you want to assign to the DSL interface.

xDSL Network Module for the UTM9S and UTM25S

571