NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual  To edit a protocol binding, 617

ProSecure Unified Threat Management (UTM) Appliance

Table 156. Add Protocol Binding screen settings (continued)

Setting	Description
Destination	The destination network settings determine which Internet locations (based on their IP
Network	address) are covered by the rule. Select one of the following options from the drop-down
	list:
	Any	All Internet IP address.
	Single address	In the Start IP field, enter the IP address to which the rule is applied.
	Address range	In the Start IP field and End IP field, enter the IP addresses for the
		range to which the rule is applied.

4.Click Apply to save your settings. The protocol binding rule is added to the Protocol Bindings table. The rule is automatically enabled, which is indicated by the ! status icon, a green circle.

To edit a protocol binding:

1.On the Protocol Bindings screen (see Figure 354 on page 615), in the Protocol Bindings table, click the Edit table button to the right of the binding that you want to edit. The Edit Protocol Binding screen displays. This screen shows the same fields as the Add Protocol Binding screen (see the previous figure).

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

To enable, disable, or delete one or more protocol bindings:

1.On the Protocol Bindings screen (see Figure 354 on page 615), select the check box to the left of each protocol binding that you want to enable, disable, or delete, or click the Select All table button to select all bindings.

2.Click one of the following table buttons:

•Enable. Enables the binding or bindings. The ! status icon changes from a gray circle to a green circle, indicating that the selected binding or bindings are enabled. (By default, when a binding is added to the table, it is automatically enabled.)

•Disable. Disables the binding or bindings. The ! status icon changes from a green circle to a gray circle, indicating that the selected binding or bindings are disabled.

•Delete. Deletes the binding or bindings.

3G/4G Dongles for the UTM9S and UTM25S

617