NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual 120, DNS Proxy

ProSecure Unified Threat Management (UTM) Appliance

Table 23. DMZ Setup screen settings (continued)

Setting	Description
Enable LDAP	To enable the DHCP server to provide Lightweight Directory Access Protocol
information	(LDAP) server information, select the Enable LDAP information check box. Enter
	the following settings:
	LDAP Server	The IP address or name of the LDAP server.
	Search Base	The search objects that specify the location in the directory tree
		from which the LDAP search begins. You can specify multiple
		search objects, separated by commas. The search objects
		include:
		• CN (for common name)
		• OU (for organizational unit)
		•	O (for organization)
		•	C (for country)
		•	DC (for domain)
		For example, to search the Netgear.net domain for all last
		names of Johnson, you would enter:
		cn=Johnson,dc=Netgear,dc=net
	Port	The port number for the LDAP server. The default setting is 0
		(zero).
DNS Proxy
Enable DNS Proxy	This setting is optional. To enable the UTM to provide a LAN IP address for DNS
	address name resolution, select the Enable DNS Proxy check box. This check box
	is selected by default.
	Note: When the DNS Proxy option is disabled, all DHCP clients receive the DNS
	IP addresses of the ISP but without the DNS proxy IP address.

3.Click Apply to save your settings.

Note: For all UTM models except for the UTM50, the DMZ LED next to LAN port 4 (see Hardware Features on page 24) lights green to indicate that the DMZ port is enabled. For the UTM50, the DMZ LED next to LAN port 6 lights green to indicate that the DMZ port is enabled.

For information about how to define the DMZ WAN rules and LAN DMZ rules, see Configure DMZ WAN Rules on page 142 and Configure LAN DMZ Rules on page 145, respectively.

LAN Configuration

120