NETGEAR STM150EW-100NAS manual Traffic Metering Logs, Unicast, Multicast, and Broadcast Logs, 655

ProSecure Unified Threat Management (UTM) Appliance

•PPP Authentication logs

Table 172. System logs: WAN status, PPP authentication

Message 1	Nov 29	11:29:26 [UTM] [pppd] Starting link
Message 2	Nov 29	11:29:29 [UTM] [pppd] Remote message: Login incorrect
Message 3	Nov 29	11:29:29 [UTM] [pppd] PAP authentication failed
Message 4	Nov 29	11:29:29 [UTM] [pppd] Connection terminated. WAN2(DOWN)_
Explanation	Message 1: The PPPoE connection process starts.
	Message 2: The PPPoE server indicates that the login is incorrect.
	Message 3: The PPP authentication fails because of incorrect login.
	Message 4: The PPP connection terminates.
Recommended Action	If authentication fails, verify the correct login name and password, and then enter
	the correct information.

Traffic Metering Logs

This section describes logs that are generated when the traffic meter has reached a limit.

Table 173. System logs: traffic metering

Message	Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10 MB
	has reached for WAN1._
Explanation	Logs that are generated when the traffic limit for WAN1 interface that was set at 10
	MB has been reached. Depending on the setting that is configured in the When
	Limit is reached section on the WAN1 Traffic Meter screen (see Enable the WAN
	Traffic Meter on page 462), all the incoming and outgoing traffic might be stopped.
	Note: For WAN2 interface, see the settings on the WAN2 Traffic Meter screen.
Recommended Action	To start the traffic, restart the traffic counter in the Traffic Counter section on the
	WAN1 Traffic Meter screen.
	Note: For WAN2 interface, see the settings on the WAN2 Traffic Meter screen.

Unicast, Multicast, and Broadcast Logs

This section describes logs that are generated when the UTM processes unicast packets.

Table 174. System logs: unicast

Message	Nov 24 11:52:55 [UTM] [kernel] UCAST IN=SELF OUT=WAN SRC=192.168.10.1
	DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
Explanation	•	This unicast packet is sent to the device from the WAN network.
	•	For other settings, see Table 161 on page 648.
Recommended Action	None.

System Logs and Error Messages

655