NETGEAR UTM5EW-100NAS manual Report Filtering Options,  To configure filtering options, 522

ProSecure Unified Threat Management (UTM) Appliance

2.Select the Enable Application Session Monitoring check box. By default, this check box is cleared.

3.Click Apply to save your changes.

Report Filtering Options

Before you generate reports to view onscreen or schedule reports to be emailed, you might want to configure filtering options. If you do not configure filtering options, the default settings apply. The report default settings are:

•Time range. The last 24 hours.

•Destination. None.

•Count. 10.

•Chart Type. Vertical bar.

To configure filtering options:

1. Select Monitoring > Logs & Reports > Report. The Report screen displays. (The following figure shows only the sections with the preconfigured report templates.)

Figure 308. Report, screen 1 of 4

Monitor System Access and Performance

522