NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual XDSL, or USB Port Status on, 607

ProSecure Unified Threat Management (UTM) Appliance

Table 154. USB ISP settings (continued)

Setting	Description
Use These DNS	If your ISP has assigned DNS addresses, select the Use These DNS Servers radio
Servers	button. Make sure that you fill in valid DNS server IP addresses in the fields. Incorrect
	DNS entries might cause connectivity issues.
	Primary DNS Server	The IP address of the primary DNS server.
	Secondary DNS	The IP address of the secondary DNS server.
	Server

5.Click Apply to save any changes to the USB ISP settings. (Or click Reset to discard any changes and revert to the previous settings.)

6.To verify the connection:

a.Return to the WAN screen by selecting Network Config > WAN Settings.

b.Click the Status button in the Action column for the USB interface that you just configured to display the Connection Status pop-up screen.

Figure 350.

Note: The Connection Status screen should show a valid IP address and gateway (the example in the previous figure does not). For more information about the Connection Status screen, see View the WAN,

xDSL, or USB Port Status on page 504.

3G/4G Dongles for the UTM9S and UTM25S

607