ProSecure Unified Threat Management (UTM) Appliance

Before You Change the SSID, WEP, and WPA Settings

For a new wireless profile, print or copy the following form and fill in the settings.

_________________________________________________________________________

Store this information in a safe place:

SSID

The service set identifier (SSID) identifies the wireless local area network. You can customize it by using up to 32 alphanumeric characters. Write your SSID on the line.

SSID: ___________________________________

The SSID in the wireless profile is the SSID you configure on the wireless adapter card. All wireless nodes in the same network need to be configured with the same SSID.

WEP key size, key format, authentication type, and passphrase Choose the key size by circling one: 64, 128, or 256 bits. Choose the key format by circling one: ASCII or HEX.

Choose the authentication type by circling one: open or shared.

Passphrase: ___________________________________

Note: If you select shared key, the other devices in the network cannot connect unless they are set to shared key and have the same keys in the same positions as those in the security profile on the wireless network module.

WPA-PSK (pre-shared key) and WPA2-PSK Record the WPA-PSK passphrase:

WPA-PSK passphrase: ________________________________

Record the WPA2-PSK passphrase:

WPA2-PSK passphrase: ________________________________

WPA RADIUS settings

For WPA, record the following settings for the primary and secondary RADIUS servers: Server name/IP address: Primary ________________ Secondary _________________

Port: ___________________________________

Shared secret: ___________________________________

WPA2 RADIUS settings

For WPA2, record the following settings for the primary and secondary RADIUS servers: Server name/IP address: Primary ________________ Secondary _________________

Port: ___________________________________

Shared secret: ___________________________________

_________________________________________________________________________

Wireless Network Module for the UTM9S and UTM25S

587

Page 587
Image 587
NETGEAR STM150EW-100NAS Before You Change the SSID, WEP, and WPA Settings, WPA Radius settings, WPA2 Radius settings, 587