ProSecure Unified Threat Management (UTM) Appliance

The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop button.

To view the active L2TP tunnel users, select Monitoring > Active Users & VPNs > L2TP Active Users. The L2TP Active Users screen displays:

Figure 294.

The List of L2TP Active Users table lists each active connection with the information that is described in the following table.

Table 131. L2TP Active Users screen information

Item

Description

 

 

Username

The name of the L2TP user that you have defined (see Configure User Accounts on

 

page 401).

 

 

Remote IP

The client’s IP address on the remote LAC.

 

 

L2TP IP

The IP address that is assigned by the L2TP server.

 

 

Action

Click the Disconnect table button to terminate the connection. (This button is displayed

 

only when there an active connection.)

The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop button.

View the Port Triggering Status

To view the status of the port-triggering feature:

1.Select Network Security > Port Triggering. The Port Triggering screen displays. (The following figure shows one rule in the Port Triggering Rules table as an example.)

Monitor System Access and Performance

502

Page 502
Image 502
NETGEAR UTM5EW-100NAS manual View the Port Triggering Status,  To view the status of the port-triggering feature, 502