NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Create a Client-to-Gateway VPN Tunnel, 271

ProSecure Unified Threat Management (UTM) Appliance

Figure 155.

b.Locate the policy in the table, and click the Connect table button. The IPSec VPN connection becomes active.

Note: When using FQDNs, if the Dynamic DNS service is slow to update its servers when your DHCP WAN address changes, the VPN tunnel fails because the FQDNs do not resolve to your new address. If you have the option to configure the update interval, set it to an appropriately short time.

Create a Client-to-Gateway VPN Tunnel

Figure 156.

To configure a VPN client tunnel, follow the steps in the following sections:

•Use the VPN Wizard to Configure the Gateway for a Client Tunnel on page 272.

•Use the NETGEAR VPN Client Wizard to Create a Secure Connection on page 276 or Manually Create a Secure Connection Using the NETGEAR VPN Client on page 280.

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

271