ProSecure Unified Threat Management (UTM) Appliance

Figure 69.

2.Enter the settings as explained in Table 28 on page 135.

3.Click Apply to save your changes. The new rule is now added to the Inbound Services table.

Configure DMZ WAN Rules

Create DMZ WAN Outbound Service Rules

Create DMZ WAN Inbound Service Rules

The firewall rules for traffic between the DMZ and the Internet are configured on the DMZ WAN Rules screen. The default outbound policy is to block all traffic from and to the Internet. You can then apply firewall rules to allow specific types of traffic either going out from the DMZ to the Internet (outbound) or coming in from the Internet to the DMZ (inbound).

There is no drop-down list that lets you set the default outbound policy as there is on the LAN WAN Rules screen. You can change the default outbound policy by enabling all outbound traffic and then blocking only specific services from passing through the UTM. You do so by

Firewall Protection

142

Page 142
Image 142
NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Configure DMZ WAN Rules, 142