NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 131, Groups and Hosts LAN Groups on

ProSecure Unified Threat Management (UTM) Appliance

Table 27. Outbound rules overview (continued)

Setting	Description	Outbound Rules
LAN Users	The settings that determine which computers on your network are	LAN WAN rules
	affected by this rule. The options are:	LAN DMZ rules
	• Any. All computers and devices on your LAN.
	• Single address. Enter the required address in the Start field to
	apply the rule to a single device on your LAN.
	• Address range. Enter the required addresses in the Start and
	End fields to apply the rule to a range of devices.
	• Group. Select the LAN group to which the rule applies. Use the
	LAN Groups screen to assign computers to groups. See Manage
	Groups and Hosts (LAN Groups) on page 111.
	• IP Group. Select the IP group to which the rule applies. Use the
	IP Groups screen to assign IP addresses to groups. See Create
	IP Groups on page 167.
WAN Users	The settings that determine which Internet locations are covered by	LAN WAN rules
	the rule, based on their IP address. The options are:	DMZ WAN rule
	• Any. All Internet IP addresses are covered by this rule.
	• Single address. Enter the required address in the Start field.
	• Address range. Enter the required addresses the Start and End
	fields.
	• IP Group. Select the IP group to which the rule applies. Use the
	IP Groups screen to assign IP addresses to groups. See Create
	IP Groups on page 167.
DMZ Users	The settings that determine which DMZ computers on the DMZ	DMZ WAN rules
	network are affected by this rule. The options are:	LAN DMZ rules
	• Any. All computers and devices on your DMZ network.
	• Single address. Enter the required address in the Start field to
	apply the rule to a single computer on the DMZ network.
	• Address range. Enter the required addresses in the Start and
	End fields to apply the rule to a range of DMZ computers.
Users Allowed	The settings that determine which user or group on the network is	LAN WAN rules
	affected by this rule. You can select a local user, local group, or	LAN DMZ rules
	customer group. To create a custom group, select + Create New from
	the Users Allowed drop-down list on a firewall screen that lets you add
	or edit a rule (you can find the + Create New link under the Custom
	Groups heading on such a screen). For information about setting up
	custom groups, see Configure Custom Groups on page 397.

Firewall Protection

131