NETGEAR UTM5EW-100NAS manual Update the Firmware, View the Available Firmware Versions, 448

ProSecure Unified Threat Management (UTM) Appliance

WARNING:

When you press the hardware Factory Defaults reset button or click the software Default button, the UTM settings are erased. All firewall rules, VPN policies, LAN/WAN settings, and other settings are lost. Back up your settings if you intend on using them.

Note: After rebooting with factory default settings, the UTM’s password is password, and the LAN IP address is 192.168.1.1.

Update the Firmware

The UTM can automatically detect a new firmware version from a NETGEAR update server. The firmware upgrade process for the UTM consists of the following four stages:

1.Querying the available firmware versions from the NETGEAR update server.

2.Selecting a firmware version to download directly to the UTM (that is, not first to a computer in your network and then to the UTM).

3.Installing the downloaded firmware version.

4.Rebooting the UTM with the new firmware version.

These stages are explained in detail in the following sections.

View the Available Firmware Versions

To view the current version of the firmware that your UTM is running and the other available firmware versions:

1. Select Administration > System Update > Firmware. The Firmware screen displays:

Network and System Management

448