NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Wireless Network Module for UTM9S and UTM25S, 578

B. Wireless Network Module for the		B
	UTM9S and UTM25S

This appendix describes how to configure the wireless features of the NMSWLSN wireless network module that you can install in a UTM9S or UTM25S. This appendix includes the following sections:

•Overview of the Wireless Network Module

•Configure the Basic Radio Settings

•Wireless Data Security Options

•Wireless Security Profiles

•Configure a Wireless Distribution System

•Configure Advanced Radio Settings

•Configure WMM QoS Priority Settings

•Test Basic Wireless Connectivity

•For More Information About Wireless Configurations

Before you set up the wireless features that are described in this appendix, connect the UTM9S or UTM25S and get the Internet connection working. The UTM9S or UTM25S should work with an Ethernet or DSL WAN connection, or with both. In planning your wireless network, consider the level of security required.

Note: In previous releases for the UTM9S, this network module was referred to as the UTM9SWLSN. The UTM9SWLSN is identical to the NMSWLSN.

WARNING:

If you are configuring the wireless settings from a wireless computer and you change the wireless network module’s SSID, channel, or wireless security settings, you will lose your wireless connection when you click Apply. You then need to change the wireless settings of your computer to match the wireless network module’s new settings.

578