NETGEAR STM150EW-100NAS, UTM5EW-100NAS Radius Client screen settings, 311, Backup Radius Server

ProSecure Unified Threat Management (UTM) Appliance

2.Complete the fields and select the radio buttons as explained in the following table:

Table 76. RADIUS Client screen settings

Setting Description

Primary RADIUS Server

To enable and configure the primary RADIUS server, select the Yes radio button, and then enter the settings for the three fields to the right. The default setting is that the No radio button is selected.

Primary Server IP Address	The IP address of the primary RADIUS server.
Secret Phrase	A shared secret phrase to authenticate the transactions between the client
	and the primary RADIUS server. The same secret phrase needs to be
	configured on both the client and the server.
Primary Server NAS	The primary network access server (NAS) identifier that needs to be present
Identifier	in a RADIUS request.
	Note: The UTM functions as an NAS, allowing network access to external
	users after verification of their authentication information. In a RADIUS
	transaction, the NAS needs to provide some NAS identifier information to the
	RADIUS server. Depending on the configuration of the RADIUS server, the
	UTM’s IP address might be sufficient as an identifier, or the server might
	require a name, which you need to enter in this field.

Backup RADIUS Server

To enable and configure the backup RADIUS server, select the Yes radio button, and then enter the settings for the three fields to the right. The default setting is that the No radio button is selected.

Backup Server IP Address	The IP address of the backup RADIUS server.
Secret Phrase	A shared secret phrase to authenticate the transactions between the client
	and the backup RADIUS server. The same secret phrase needs to be
	configured on both the client and the server.
Backup Server NAS	The backup network access server (NAS) identifier that needs to be present
Identifier	in a RADIUS request.
	Note: See the note earlier in this table for the Primary Server NAS Identifier.
Connection Configuration
Time out period	The period in seconds that the UTM waits for a response from a RADIUS
	server.
Maximum Retry Counts	The maximum number of times that the UTM attempts to connect to a
	RADIUS server.

3.Click Apply to save your settings.

Note: You can select the RADIUS authentication protocol (PAP or CHAP) on the Edit IKE Policy screen or Add IKE Policy screen (see Configure XAUTH for VPN Clients on page 309).

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

311