NETGEAR UTM5EW-100NAS 668, Feature Default behavior Firewall and network security, Sip Alg, Ips

ProSecure Unified Threat Management (UTM) Appliance

Table 193. UTM default configuration settings (continued)

Feature		Default behavior
Firewall and network security
	Inbound LAN WAN rules (communications coming in	All traffic is blocked, except for traffic in
	from the Internet)	response to requests from the LAN.
	Outbound LAN WAN rules (communications from the	All traffic is allowed.
	LAN to the Internet)
	Inbound and outbound DMZ WAN rules	None
	Inbound and outbound LAN DMZ rules	None
	Respond to ping on WAN (Internet) ports	Disabled
	Stealth mode	Enabled
	Block TCP flood	Disabled
	Block UDP flood	Disabled
	Respond to ping on LAN ports	Disabled
	VPN pass-through for IPSec in NAT mode	Enabled
	VPN pass-through for PPTP in NAT mode	Enabled
	VPN pass-through for L2TP in NAT mode	Enabled
	Multicast pass-through for IGMP	Disabled
	Session limits	Disabled
	TCP time-out	1200 seconds
	UDP time-out	180 seconds
	ICMP time-out	8 seconds
	SIP ALG	Disabled
	VPN scanning	Disabled
	Source MAC filtering	Disabled
	IP/MAC bindings	Disabled
	Port triggering rules	None
	UPnP	Disabled
	QoS profiles	None configured
	Bandwidth profiles	None configured
	LAN traffic meter profiles	None configured
	IPS	Disabled

Default Settings and Technical Specifications

668