ProSecure Unified Threat Management (UTM) Appliance

To add a port-triggering rule:

1.Select Network Security > Port Triggering. The Port Triggering screen displays. (The following figure shows a rule in the Port Triggering Rule table as an example.)

Figure 103.

2.In the Add Port Triggering Rule section, enter the settings as explained in the following table:

Table 38. Port Triggering screen settings

Setting

Description

 

 

 

Name

A descriptive name of the rule for identification and management purposes.

 

 

Enable

From the drop-down list, select Yes to enable the rule. (You can define a rule but not

 

enable it.) The default setting is No.

 

 

Protocol

From the drop-down list, select the protocol to which the rule applies:

 

TCP. The rule applies to an application that uses the Transmission Control

 

Protocol (TCP).

 

UDP. The rule applies to an application that uses the User Datagram Protocol

 

(UDP).

 

Outgoing (Trigger)

Start Port

The start port (1–65534) of the range for triggering.

Port Range

 

 

End Port

The end port (1–65534) of the range for triggering.

 

 

 

 

Incoming (Response)

Start Port

The start port (1–65534) of the range for responding.

Port Range

 

 

End Port

The end port (1–65534) of the range for responding.

 

 

 

 

3.Click the Add table button. The new port-triggering rule is added to the Port Triggering Rules table.

Firewall Protection

184

Page 184
Image 184
NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual  To add a port-triggering rule, Port Triggering screen settings, 184