NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 383

ProSecure Unified Threat Management (UTM) Appliance

Figure 227.

If you do not use the DC agent in your configuration (see DC Agent on page 409), after completing a session, a user needs to log out manually by following these steps:

1.Return to the User Portal Login screen (see Figure 226 on page 382).

Note: The user needs to know how to return to the User Portal Login screen. The administrator needs to provide the User Portal Login URL: https://<IP_address>/~common/cgi-bin/user_login.pl or https://<FullyQualifiedDomainName>/~common/cgi-bin/user_login.pl

Alternately, the administrator can provide the NETGEAR Configuration Manager Login screen, from which the user can access the User Portal Login screen:

https://<IP_address> or https://<FullyQualifiedDomainName>

2.Log in again.

3.On the confirmation screen (see the previous figure), click the Logout link.

WARNING:

If you do not use the DC agent in your configuration, make sure that users understand that they need to log out after completing a session in order to prevent subsequent users from inheriting access privileges that were not assigned to them.

Manage Users, Authentication, and VPN Certificates

383