NETGEAR STM150EW-100NAS manual 4G settings, 609, Setting Description 3GStatus, SIM Card state

ProSecure Unified Threat Management (UTM) Appliance

4.The information in the 3G Status section and SIM Card state section of the screen is automatically detected. If necessary, configure the connection settings as explained in the following table.

Table 155. 3G/4G settings

Setting Description

3GStatus

Note: These fields are for information only. The information is detected and cannot be modified.

Dongle Vendor	The vendor name that was detected.
Dongle Model	The model that was detected.
Dongle Serial No	The serial number that was detected.
Dongle Firmware Version	The firmware version that was detected.

SIM Card state

The SIM Card state section of the screen displays whether the SIM card in the dongle is ready (see the example in the previous figure) or whether you need to enter a personal identification number (PIN) code or personal unblocking key (PUK) code (see the following examples).

The following codes might be required to authenticate and activate or inactivate the SIM card in the dongle:

•PIN code. A PIN code required to activate or inactivate the SIM card.

•PIN2 code. A second PIN code that acts as a second layer of protection for certain dongle features.

•PUK code: If the PIN code is entered incorrectly three times, a PUK code is required.

•PUK2 code. If the PIN2 code is entered incorrectly three times, a second PUK code is required.

Note: Contact your ISP for assistance with PIN and PUK codes.

Note: If you enter the PUK code incorrectly 10 times, the SIM card might become blocked. If this situation occurs, you need to obtain a new SIM card from your ISP.

Connection Setting

Country

The country that was detected. This field is for information only and cannot be modified.

3G/4G Dongles for the UTM9S and UTM25S

609