NETGEAR UTM5EW-100NAS Support, Trademarks, ProSecure Unified Threat Management UTM Appliance

ProSecure Unified Threat Management (UTM) Appliance

Support

Thank you for choosing NETGEAR.

After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the UTM’s Registration screen (see Register the UTM with NETGEAR on page 65). You can also register your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at

http://support.netgear.com/general/contact/default.aspx.

NETGEAR recommends that you use only the official NETGEAR support resources.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their respective holders. © NETGEAR, Inc. All rights reserved.

ProSecure Product Updates

Product updates are available on the NETGEAR website at http://prosecure.netgear.com or http://support.netgear.com.

ProSecure Forum

Visit http://prosecure.netgear.com/community/forum.php for information about the ProSecure forum and to become part of the ProSecure community.

Revision History

Publication	Version	Publish Date	Comments
Part Number
202-10780-03	1.0	October 2012	• Added the UTM25S, which supports the same features as
			the UTM9S.
			• Stated support for the NETGEAR Network Management
			System NMS200.
			• Updated the figures and menu paths in Chapter 6, Content
			Filtering and Optimizing Scans, because the Application
			Security configuration menu of the web management
			interface was revised and several minor features were
			added.
			• Added Configure HTTPS Smart Block.
			• Revised Use a Simple Network Management Protocol
			Manager because new SNMP features, including support
			for SNMPv3, were added.
			• Revised Chapter 11, Monitor System Access and
			Performance because several minor features were added.
			• Updated Appendix B, Wireless Network Module for the
			UTM9S and UTM25S, because the wireless network
			module now supports four wireless security profiles and
			the Wireless Settings configuration menu of the web
			management interface was revised.

2