NETGEAR UTM5EW-100NAS, STM150EW-100NAS SSL VPN Wizard of 6 Client IP Addresses and Routes, 348

ProSecure Unified Threat Management (UTM) Appliance

After you have completed the steps in the SSL VPN Wizard, you can change the user settings or add more users for this portal by selecting Users > Users. For more information about user settings, see Configure User Accounts on page 401.

Note: A user policy that permits access is automatically added for the user account that you define with the SSL VPN Wizard.

SSL VPN Wizard Step 4 of 6 (Client IP Addresses and Routes)

Note: This screen displays only if you have selected the VPN Tunnel page check box on the SSL VPN Wizard Step 1 of 6 screen (see Figure 204 on page 339).

Figure 207.

Note that the previous figure contains an example. Enter the settings as explained in the following table, and then click Next to go the following screen.

Virtual Private Networking Using SSL Connections

348